Brother TJ-4420TNP Titan Industrial Printer with Peeler
Brother TJ-4420TNP Titan Industrial Printer with Peeler
Student's name
First and last name, and class if you know it. This goes on the pack label.
Pickup available at Mega DC – Tweed Heads South
Usually ready in 24 hours
Auto Label Peeler, Supplied With It
The Brother TJ-4420TNP is the TJ-4420TN platform supplied with Brother's auto label peeler, part PA-LP-006 included. It is a 203dpi Titan industrial printer running up to 356 mm per second.
It runs both thermal transfer and direct thermal, taking ribbon 20mm to 114mm wide up to 600m long in wax, resin or a wax and resin mix, wound inside or outside. Roll width runs 20mm to 120mm, narrowing to 20mm to 114mm in cutter mode. Maximum print length is 25,400mm. The control panel is an LCD display with a status LED.
Emulation is FBPL-EZD, compatible with FBPL II, EPL II, ZPL II and DPL, so it can usually take label data from a system already driving another brand. Two published consequences of the hardware in place: in peeler mode the minimum label length is 12.7mm.
Brother publishes no separate specification for this variant at all. Every figure above is the TJ-4420TN platform's, and the hardware it ships with is quoted from Brother's own accessory listing. Ask us for ribbon and media to suit. Our label supplies and the wider labelling machine range are linked here.
Connectivity on this model
- USB 2.0 Full Speed Type B
- RS-232C serial
- 10/100 wired Ethernet