Brother BU-800CL Genuine Belt Unit 100,000 Pages
Brother BU-800CL Genuine Belt Unit 100,000 Pages
Student's name
First and last name, and class if you know it. This goes on the pack label.
Pickup available at Mega DC – Tweed Heads South
Usually ready in 24 hours
The Part That Keeps Your Colours Lined Up
The genuine Brother BU-800CL is a colour laser belt unit - the part that carries toner from the drum to the page and keeps the four colours in register - rated by Brother at approximately 100,000 pages at one page per job or approximately 150,000 pages at two pages per job.
A colour laser has four wear parts, not one: the toner cartridges, the drum, the belt unit and the waste toner box. The belt is the one most people have never heard of, and it is the one that governs colour alignment. Brother's own fault guidance for colour offset and for a failed colour registration ends with the same instruction - install a new belt unit. If your colours are very slightly out of line with each other, this is the part to look at before anything else. Brother Australia lists it for the HL-L9470CDN, MFC-L9630CDN and MFC-L9670CDN.
Brother publishes more than one figure for this part and they do not all agree, so we quote it conservatively: approximately 100,000 pages at one page per job, or approximately 150,000 pages at two pages per job. Those are the figures Brother's support site and its printer brochures both give. Brother's own product listing shows 130,000 at the two-page basis instead. We would rather show you the range and the discrepancy than pick the flattering number and hope.
Your printer will warn you before it stops. Brother's display shows Belt End Soon first, which is the point at which to order, and Replace Belt when it is due. One step people miss: after fitting a new belt you must reset the belt counter in the machine's Parts Life menu, or the printer keeps counting the old one. It works with the DR-851CL drum, the TN-851 and TN-851XL toner range and the WT-800CL waste toner box, and the printer reports each of them separately, so they rarely fall due together. Using the genuine Brother part keeps the printer's own parts-life counters accurate, which is what lets it warn you in advance instead of failing mid-job. Replacement is an end-user job.
Suits these Brother printers
- HL-L9470CDN
- MFC-L9630CDN
- MFC-L9670CDN